


Puzzle Glue Sheets & Puzzle Preserver Sheets
Peel-and-stick sheets that bond a finished jigsaw puzzle into one rigid panel, ready to frame. The adhesive goes on the back, so the front of your puzzle keeps its original finish with no glossy coat and no drying time.
Puzzle Glue Preservation Sheets
$9.95 per box of 8 sheets — peel-and-place, no liquid glue.
- 8 peel-and-stick sheets per box
- Each sheet measures 7 by 10 inches
- Enough to preserve up to one 1,000-piece puzzle
- Acid-free adhesive that bonds to the puzzle back
Framing a finished puzzle? Size a custom puzzle frame to mount and display it.
Shop puzzle framesShips in 1-2 business days
Framing the puzzle too?
Once your puzzle is glued and rigid, build a shadow box frame sized to the finished puzzle. Design it below and add it alongside your glue sheets.
How to apply the sheets
- 1
Lay the puzzle face down
Move your completed puzzle onto a clean, flat surface with the picture facing the table.
- 2
Peel and press
Peel the backing off a sheet and press the adhesive side onto the back of the puzzle, overlapping each sheet so the whole puzzle is covered.
- 3
Smooth and flip
Press out any air, then flip the puzzle over. The pieces are now bonded into one rigid panel ready to frame.
How many sheets you need
One box covers up to a 1,000-piece puzzle. Smaller puzzles use fewer sheets, so a single box often handles two or three smaller puzzles. Overlap each sheet slightly for full coverage.
Sheets vs liquid glue
Liquid glue is brushed onto the front of the puzzle and leaves a glossy coat once it dries. These sheets bond to the back instead, so the picture keeps its original look. There is no wet glue, no drying time, and no warping from moisture.
Ready to frame the finished puzzle?
See custom puzzle frames sized for 500, 1,000, and 2,000-piece jigsaws with non-glare acrylic options.
